All Products

The New Standard for Home Coffee GrindersThe X54 Allround Home Grinder is the home barista’s gateway to pro-level grinding and more delicious coffe...

Complete belt and pulley set for the VARIO Home coffee grinder.Available while supplies last, this spare part will be discontinued. Old article num...

Motor with pulley set for the VARIO Home coffee grinder. Available while supplies last, this spare part will be discontinued. Old article number: 2...

Bean hopper for the VARIO Home coffee grinder.Available while supplies last, this spare part will be discontinued.

Single flapper piece for K30 2.0, K30 TWIN, K30 TWIN 2.0, K30 ES/VARIO and K30 VARIO AIR espresso grinders Old article number:  310139 or 243558

The ultimate gift for any coffee nerd is the EK43 brick set. So, if you were looking for that one gadget that will put a smile on your best barista...

For E65S, E65S GbW, K30, K30 2.0, K30 TWIN, K30 TWIN 2.0, K30 ES/VARIO and K30 VARIO AIR espresso grinders. Also compatible with Anfim Pratica and ...

Includes 1 can with 430 g.GRINDZ Grinder Cleaner to remove coffee residues inside the grinder casing and keep grounds fresh at all times. Use for r...

Complete bean hopper with 800 gram capacity for EK43, EK43 S, EKK43, K30 TWIN and K30 TWIN 2.0 coffee grinders Old article number: 309426

Short bean hopper with 250 gram capacity for the X54 Allround Home coffee grinder

The handy, small stainless steel Mahlkönig Dosing Cup allows a precise transfer of the ground coffee from the grinder directly into the portafilter...

Material: ceramicDiameter: 54mmFinish: StandardHardness: 64-66 HRC (Rockwell)Medium Setting Grind Life: ca. 2.000kg Ceramic burrs with optimized ge...

The EK43, EK43 S, EKK43 alignment tool eliminates any misalignment of the burrs to the motor shaft. The resulting concentricity guarantees for abso...

Spout contact stripe for EK43, EK43 S and EKK43 Allround grinders Old article number: 701373

Drip tray for PEAK, K30 2.0, K30 ES/VARIO and K30 VARIO AIR espresso grinders Old article number: 306340

One silicone and metal flapper set for E65S and E65S GbW espresso grinders

Complete short bean hopper with 250 gram capacity for E65S, E65S GbW, E80S and E80S GbW espresso grinders

On and off (O and I) button replacement with 220-240 V for Guatemala, Kenia, K32 and EK43 (before April 2018) coffee grinders Old article number: 1...

Complete bean hopper with 1500 gram capacity for EK43, EK43 S, EKK43, PEAK, K30 2.0, K30 ES/VARIO and K30 VARIO AIR coffee grinders Old article num...

Single flapper piece for the X54 Allround Home coffee grinder

Complete grinding house set with 200-240 V for K30, K30 TWIN and K30 TWIN 2.0 espresso grinders

Drip tray for the K30 TWIN espresso grinder

Running capacitor with 10 µF, 200-240 V for K30 2.0, K30 TWIN and K30 TWIN 2.0 espresso grinders

One single bean hopper seal ring for E65S, E65S GbW, PEAK, K30 2.0, K30 ES/VARIO and K30 VARIO AIR espresso grinders Old article number: 701119

Shear plate for the EK43, EK43 S and EKK43 Allround grinders

Klüberpaste lubricating and assembly white paste in a 60 gram tube for use with all coffee grinders. NSF H1 registered. Old article number: 309336

Ten bean hopper seal rings for E65S, E65S GbW, PEAK, K30 2.0, K30 ES/VARIO and K30 VARIO AIR espresso grinders Old article number: 309087

Micro switch portafilter set for K30, K30 TWIN and PEAK espresso grinders

It's the little things that matter! The EK43S pin quickly adds some style to your favorite jacket or bag. The pin is approximately 25mm high, made ...

Pulling tool to take out the disc carrier, for burrs exchange or other maintenance, on EK43, EK43 S, EKK43, VTA 6S and DK15 coffee grinders Old art...

Single silicone flapper piece with 15.8 mm diameter, only for K30 and K30 TWIN espresso grinders with serial numbers between 515745 - 523560

Material: hardened special steel Diameter: 54mm Finish: glass bead blasted for optimal deburring and prevention of burr settling behavior Hardness:...

Complete short bean hopper in black with white logo and 250 gram capacity for EK43, EK43 S and EKK43 Allround grinders Old article number: 701553