EKK43 Spare Parts

The handy, small stainless steel Mahlkönig Dosing Cup allows a precise transfer of the ground coffee from the grinder directly into the portafilter...

Spout contact stripe for EK43, EK43 S and EKK43 Allround grinders Old article number: 701373

The EK43, EK43 S, EKK43 alignment tool eliminates any misalignment of the burrs to the motor shaft. The resulting concentricity guarantees for abso...

Complete bean hopper with 1500 gram capacity for EK43, EK43 S, EKK43, PEAK, K30 2.0, K30 ES/VARIO and K30 VARIO AIR coffee grinders Old article num...

The handy, stainless steel Mahlkönig Dosing Cup with 220ml capacity allows for single dosing of coffee beans into the grinder and transfer of the g...

Complete short bean hopper in black with white logo and 250 gram capacity for EK43, EK43 S and EKK43 Allround grinders Old article number: 701553

Shear plate for the EK43, EK43 S and EKK43 Allround grinders

Klüberpaste lubricating and assembly white paste in a 60 gram tube for use with all coffee grinders. NSF H1 registered. Old article number: 309336

Hopper slider to close the bean hoppers of EK43, EK43 S, EKK43, K30 TWIN and K30 TWIN 2.0 coffee grinders Old article number: 308680

Pulling tool to take out the disc carrier, for burrs exchange or other maintenance, on EK43, EK43 S, EKK43, VTA 6S and DK15 coffee grinders Old art...

Klüberpaste synthetic lubricating grease in a 50 gram tube for use with all coffee grinders. NSF H1 registered.

Starting capacitor with 180µF, 220-240 V for EK43, EK43 S, EKK43, Guatemala and K32 coffee grinders Old article number: 105973

Circuit breaker switch with 200-240 V for EK43, EKK43, EK43 S (before April 2018), Guatemala, Guatemala 2.0, and Kenia coffee grinders Old article ...

Grind size adjustment knob for EK43, EK43 S and EKK43 Allround grinders after serial number 549819

Grind size adjustment knob with larger inner diameter for EK43, EK43 S and EKK43 Allround grinders before serial number 549819

Single bean hopper seal ring for EK43 and EK43 S grinders before serial number 908658 and for EKK43 and K30 TWIN 2.0 coffee grinders

Complete bean hopper in white matte with 1500 gram capacity for EK43, EK43 S, EKK43, K30 2.0, K30 ES/VARIO and K30 VARIO AIR coffee grinders

Drip tray for the EK43, EK43 S and EKK43 allround grinders

Spout fastening small parts set for EK43, EK43 S and EKK43 Allround grinders

Spout seal for 200-240V, for the EK43, EK43 S and EKK43 Allround grinders

Bag clamping axle and pressure spring set for EK43, EK43 S and EKK43 Allround grinders

One bag clamping rubber buffer for EK43, EK43 S and EKK43 Allround grinders

Spout with knocker and bag clamp complete set for EK43, EK43 S and EKK43 Allround grinders